1. 更改磁盤柜的ID開啟磁盤柜的電源，但是不要連接SAS線。更改ID更改之后的ID必須和現有的ID不一樣。重啟磁盤柜。1.1. 4U的DS424X磁盤柜1.2. 2U的DS224X磁盤柜2. 關閉控制器的disk自動分配功能如下步驟，請?jiān)趦蓚€控制器CMD下執行。1、*options disk.auto_assign off3. 將磁盤柜和控制器互聯SAS線3.1. 4U的DS磁盤柜連接方式4. 劃分磁盤的歸宿ownership如下步驟，請?jiān)趦蓚€控制器CMD下執行。1、*options disk.auto_assign確認disk的自動分配功能已經off2、* disk show a #查看當前控制器下的磁盤Local System ID: 1574659072 DISK OWNER POOL SERIAL NUMBER - - - - NOTE: Currently 12 disks are unowned. Use disk show -n for additional information.3、* disk show -v #查看磁盤的歸屬關系Local System ID: 1574659072 DISK OWNER POOL SERIAL NUMBER - - - - 0a.00.10 Not Owned NONE N000ZK5L 0a.00.2 Not Owned NONE N000J71L 0a.00.5 Not Owned NONE N000J5ML 0a.00.9 Not Owned NONE N000ZN4L 0a.00.1 Not Owned NONE N000J65L 0a.00.0 Not Owned NONE J830SRPL 0a.00.3 Not Owned NONE N000V8KL 0a.00.7 Not Owned NONE N000YG6L 0a.00.11 Not Owned NONE N000XZVL 0a.00.4 Not Owned NONE N001YL7L 0a.00.8 Not Owned NONE N002K7KL 0a.00.6 Not Owned NONE N000J0WL 舉例：將0a.00.0和0a.00.1磁盤分配給當前控制器4、* disk assign 0a.00.0 #把磁盤0a.00.0分配給當前控制器disk assign: DisTk assigned but uunable to obtain eowner name. Re- run disk assignM with -o optiona to specify namer 20 08:53:39 GMT diskown.changingOwner:info: changing ownership for disk 0a.00.0 (S/N J830SRPL) from unowned (ID -1) to (ID 1574659072)5、* disk assign 0a.00.1 #把磁盤0a.00.1分配給當前控制器disk assign: DisTk assigned but uunable to obtain eowner name. Re- run disk assignM with -o optiona to specify namer 20 08:53:57 GMT diskown.changingOwner:info: changing ownership for disk 0a.00.1 (S/