1、 工業控制現場總線電纜Fieldbus cable used in industrial control system工業控制現場總線電纜Fieldbus cable used in industrial control system一、 產品特點及用途用于工業控制系統的全數字、串行、雙向通信的現場總線網絡中，將傳感器、執行器及控制器等現場設備互相連接起來。還可以通過現場總線將用于過程和制造自動化的儀表連接為局域網。該總線電纜符合基金會現場總線（FF）電纜的要求。. Characteristics and ApplicationThe fieldbus cables are used to c

2、onnect fieldbus devices such as transducers,actuators and controllers etc.in fieldbus network with digital,serial and two-way communication industrial control system.It can also be used to connect process and manufacture automatic instruments into LAN.The fieldbus cable conform to the FF requirement

3、.二、 產品執行標準CEI IEC 61158-2. Implemented standardCEI IEC 61158-2三、 使用特性1 額定電壓 U0/U：300/500V2 工作溫度：PE -4075 PVC -4075 FEP -40753 安裝敷設溫度：不低于04 電纜允許最小彎曲半徑：非鎧裝電纜應不小于電纜外徑的8倍 鎧裝電纜應不小于電纜外徑的16倍. Application characteristics1. Rated AC Voltage U0/U: 300/500V2. Operating temperature: PE -4075 PVC -4075 FEP -6020

4、03. Mounting deploying temperature: Not under 04. Allowed minimum bending radius:Not smaller than 8 times outer diameter for armoured cable Not smaller than 16 times outer diameter for non-armoured cable 四、型號說明. Type illustration WDZ F L1 Y33 A 3 × 2 ×0.8（7×26AWG） 規格代號 Specification c

5、ode 類型代號 Type code 結構代號 Structure code 速率代號 Velocity code 系列代號 Series code 阻燃代號 Flame-retardant code l 代號名稱和含義l Code and its indication項目Item代號Code代號含義Code Indication阻燃代號Flame-proof code / 非阻燃可省略 Non flame-proof (omission)ZR 普通阻燃 General flame retardantZA A 類阻燃 Class A flame-proof ZB B 類阻燃 Class B f

6、lame-proofZC C 類阻燃 Class C flame-proofZD D 類阻燃 Class D flame-proofDDZ 低鹵低煙阻燃 Low halogen and low smoke flame proofWDZ 無鹵低煙阻燃 Halogen-free and low smoke flame proof說明Illustration 成束燃燒試驗A、B、C、D四類，A類最優。DDZ、WDZ也分A、B、C、D四類，如DDZA、WDZB。 本公司主要生產A類或B類阻燃電纜。 Among the bundle-burning test class A, B, C, D, clas

7、s A is the best. DDZ, WDZ are also classified to class A, B, C, D, for example DDZA, WDZB. We mainly produce class A or B cables.系列代號Series CodeF 現場總線電纜 Fieldbus cable FI 本質安全現場總線電纜 Intrinsically safe fieldbus cable速率代號 Velocity codeL1 低速 Low velocity(31.25kbit/s)H 高速 High velocityH10 高速 High veloci

8、ty(1.0Mbit/s)H25 高速 High velocity(2.5Mbit/s)結構代號 Structure code22 鋼帶鎧裝聚氯乙烯護套 Steel tape armored PVC sheath23鋼帶鎧裝聚乙烯護套 Steel tape armored PE sheath 32鋼絲鎧裝聚氯乙烯護套 Steel wire armored PVC sheath33鋼絲鎧裝聚乙烯護套 Steel wire armored PE sheathYV 聚乙烯絕緣聚氯乙烯護套 PE insulation PVC sheathYY 聚乙烯絕緣聚乙烯護套 PE insulation PE s

9、heathFF 氟塑料絕緣氟塑料護套 Fluoroplastic insulation fluoro plastic sheath類型代號 Type codeA 屏蔽絞對電纜 Twisted pair cable with overall shieldA1屏蔽絞對電纜,低功率選擇 Twisted pair cable with overall shield,with low-power option B總屏蔽多對絞對電纜 Multiple twisted pair cable with overall shieldC 非屏蔽一對或多對絞對電纜 Non-shield single or mult

10、i-pair twisted pair cableD 屏蔽多芯電纜 Shield multi-core cable五、標注舉例1 無鹵低煙阻燃B類，7股導體，低速率A型本安現場總線電纜。其型號規格表示為：WDZB-FIL1-YY-A 2×0.8(7×26AWG) 2. 普通阻燃A類，鋼絲鎧裝，聚氯乙烯護套，低速率B型現場總線電纜，10對7股導體。其型號規格表示為： ZA-FL1-Y32-B 10×2×0.32(7×30AWG). Identification example1. logen-free and low smoke flame pr

11、oof class B ,7 threads stranded conductor low velocity A type instrinclly safe fieldbus cable.The type and specification are indicated as :WDZB-FIL1-YY-A 2×0.8(7×26AWG) 2. General class A flame retardant steel wire armored PVC sheath ,low velocity B type fieldbus cable is 10 pair 7 threads

12、 stranded conductor.The type and specification are indicated as: ZA-FL1-Y32-B 10×2×0.32(7×30AWG)六、主要技術參數. Main technical parameters表中參數為25時的最低要求。型號中未含阻燃和結構代號。The following parameters are the lowest requirment at 25 There are not flame retardant and structure code in type.1. 低速現場總線電纜主要

13、技術參數 Low velocity fieldbus cable technical parameters 一般技術參數 general technical parameters 項目Item單位Unit型號TypeFL1-AFL1- A1FL1-BFL1-CFL1-D導體標稱截面Conductor nominalcross sectionmm20.818AWG0.818AWG0.3222AWG0.1326AWG1.2516AWG傳輸模式Transmiting mode-電壓voltage電壓voltage電壓voltage電壓voltage電壓voltage傳輸速率Transmiting v

14、elocitykbit/s31.2531.2531.2531.2531.2531.25kHz特性阻抗31.25kHz Impedance±%100±20100±20100±30-39kHz最大衰減39kHz Max.AttenuationdB/km3.03.05.08.08.0對屏蔽最大電容不平衡Max.Capacitanceunbalance to shieldnF/km246-導體最大直流電阻Conductor Max.DC resistance/km24245613220導體-屏蔽間最小絕緣電阻Minimum Insulationresistanc

15、e betweenconductoe and shieldG /km161621167.8kHz-39kHz最大傳輸延時Max.Propagationdelay changeµs/km1.71.7-試驗電壓Test voltageKV1min1.51.510.51.5屏蔽覆蓋率Shield cover ratio909090-本安技術參數 Intrinsically safe technical parameters項目Item單位Unit型號TypeFL1-AFL1- A1FL1-BFL1-CFL1-D導體標稱截面Conductor nominal cross sectionmm2

16、0.818AWG0.818AWG0.3222AWG0.1326AWG1.2516AWG最大工作電Max.workingcapacitancenF/km7878706080最大分布電容Max.distribution inductionmH/km0.50.5最大感阻比The radio of Inductance to resistanceµH/ 2525202030導體結構參數 Conductor structure parameters導體標稱截面(mm2)Conductor nominal cross sectionAWG0.80187×260.322

17、27×300.13267×341.251619×292.高速現場總線電纜 High velocity fieldbus cable 一般技術參數 general technical parameters項目Item單位Unit型號TypeFH10-AFH10- A1FH25-B導體標稱截面Conductor nominal cross sectionmm20.3322AWG1.516AWG0.3322AWG傳輸模式Transmiting mode-電壓、電流Voltage current電流current電壓voltage傳輸速率Transmiting veloc

18、itykbit/s1.01.02.5測試頻率frTest frequencyMHz1.01.02.5特性阻抗Impedance0.25fr±%150±1080±10150±101.25fr最大衰減Max.Attenuation0.25frdB/km6.511101.25fr132020對屏蔽最大電容不平衡Max.Capacitance unbalance to shieldnF/km1.5-1.5導體最大直流電阻Conductor Max.DC resistance/km57.115.057.1導體-屏蔽間最小絕緣電阻Minimum Insulation resistance between conductoe and shieldG /km161616試驗電壓Test voltageKV屏蔽覆蓋率Shield cover ratio959595本安技術參數 Intrinsically safe technical parameters項目Item單位Unit型號TypeFH10FH10FH25導體標稱截面Conductor nominal cross sectionmm20.3322AWG1.516AWG0.3322AWG最大工作電Max.workingcapacitan