1、51單片機流水燈C程序51單片機流水燈C程序4/451單片機流水燈C程序P0口控制，先奇數亮再偶數亮，循環三次；一個燈上下循環三次；兩個分別從兩邊往中間流動三次；再從中間往兩邊流動三次；可是這個程序實現的應當是這樣的先奇數亮再偶數亮，循環三次；一個燈上下循環三次；兩個分別從兩邊往中間流動；再從中間往兩邊流動（延時0.1s）#include#include#defineuintunsignedint#defineucharunsignedcharvoiddelay();voidmain()uchartemp,temp1,temp2,a,b;while(1)for(b=3;b0;b-)temp=0

2、 xaa;P0=temp;delay();temp=0 x55;P0=temp;delay();for(a=3;a0;a-)1/4temp=0 xfe;for(b=7;b0;b-)P0=temp;temp=_crol_(temp,1);delay();P0=temp;delay();temp1=0 xfe;temp2=0 x7f;for(a=8;a0;a-)temp=temp1&temp2;P0=temp;delay();temp1=_crol_(temp1,1);temp2=_cror_(temp2,1);voiddelay()uinta,b;for(a=100;a0;a-)for(b=10

3、0;b0;b-);程序實現的第2種方法:實現單片機led流水燈從中間向兩邊，從兩邊向中間的見效，下邊的程序就是實現思路，這個是直接調用，應當理解吧,數組那其實也能夠改一下，如采納一維數組，在多次調用；也能夠采納二維數組。#include#defineuintunsignedint#defineucharunsignedcharucharTABLE=0 xFF,0 xE7,0 xC3,0 x81,0 x00,/從中間向雙側點亮0 xFF,0 xE7,0 xC3,0 x81,0 x00,0 xFF,0 xE7,0 xC3,0 x81,0 x00,0 xFF,0 x7E,0 x3C,0 x18,0

4、x00,/從雙側向中間點亮0 xFF,0 x7E,0 x3C,0 x18,0 x00,0 xFF,0 x7E,0 x3C,0 x18,0 x00;uchari;DELAY()uints;for(s=0;s300;s+);main()while(1)if(TABLEi!=0 x01&TABLEi!=0 x33)P0=TABLEi;i+;DELAY();elsei=0;*程序詳盡功能介紹：利用取表的方法，使端口P1做單調燈的變化：左移2次，右移2次，閃耀2次（延時的時間0.2秒）。#includeunsignedcharcodetable=0 xfe,0 xfd,0 xfb,0 xf7,0 xef,0 xdf,0 xbf,0 x7f,0 xfe,0 xfd,0 xfb,0 xf7,0 xef,0 xdf,0 xbf,0 x7f,0 x7f,0 xbf,0 xdf,0 xef,0 xf7,0 xfb,0 xfd,0 xfe,0 x7f,0 xbf,0 xdf,0 xef,0 xf7,0 xfb,0 xfd,0 xfe,0 x00,0 xff,0 x00,0 xff,0 x01;unsignedchari;voiddelay(void)unsignedcharm,n,s;for(m=20;m0;m-)for(n=20;n0;n-)for(s=248;s